74 FR 19046, April 27, 2009 DEPARTMENT OF COMMERCE International Trade Administration [A-580-836] Certain Cut-to-Length Carbon-Quality Steel Plate Products From the Republic of Korea: Final Results of Antidumping Duty Administrative Review AGENCY: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: On December 19, 2008, the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty order on certain cut-to-length carbon- quality steel plate products (steel plate) from the Republic of Korea (Korea). The period of review is February 1, 2007, through January 31, 2008. We gave interested parties an opportunity to comment on the preliminary results. Based on our analysis of the comments received and an examination of our calculations, we have made changes for the final results. The final weighted-average dumping margin is listed below in the ``Final Results of the Review'' section of this notice. DATES: Effective Date: April 27, 2009. FOR FURTHER INFORMATION CONTACT: Lyn Johnson or Minoo Hatten, AD/CVD Operations, Office 5, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230, telephone: (202) 482- 5287 and (202) 482-1690, respectively. SUPPLEMENTARY INFORMATION: Background On December 19, 2008, the Department published Certain Cut-to- Length Carbon-Quality Steel Plate Products From the Republic of Korea: Preliminary Results of Antidumping Duty Administrative Review, 73 FR 77614 (December 19, 2008) (Preliminary Results), in the Federal Register. The administrative review covers one producer of the subject merchandise, Dongkuk Steel Mill Co., Ltd. (DSM). We invited parties to comment on the Preliminary Results. We received case [[Page 19047]] briefs from DSM and a domestic producer and interested party, ArcelorMittal USA Inc. (ArcelorMittal). We received a rebuttal brief from DSM. At the request of ArcelorMittal, we held a hearing on February 4, 2009. We have conducted this review in accordance with section 751(a) of the Tariff Act of 1930, as amended (the Act). Scope of the Order The products covered by the antidumping duty order are certain hot- rolled carbon-quality steel: (1) Universal mill plates (i.e., flat- rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm but not exceeding 1250 mm, and of a nominal or actual thickness of not less than 4 mm, which are cut-to-length (not in coils) and without patterns in relief), of iron or non-alloy-quality steel; and (2) flat-rolled products, hot-rolled, of a nominal or actual thickness of 4.75 mm or more and of a width which exceeds 150 mm and measures at least twice the thickness, and which are cut-to-length (not in coils). Steel products included in the scope of the order are of rectangular, square, circular, or other shape and of rectangular or non-rectangular cross-section where such non-rectangular cross-section is achieved subsequent to the rolling process (i.e., products which have been ``worked after rolling'') - for example, products which have been beveled or rounded at the edges. Steel products that meet the noted physical characteristics that are painted, varnished, or coated with plastic or other non-metallic substances are included within the scope. Also, specifically included in the scope of the order are high strength, low alloy (HSLA) steels. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Steel products included in the scope, regardless of Harmonized Tariff Schedule of the United States (HTSUS) definitions, are products in which: (1) Iron predominates, by weight, over each of the other contained elements, (2) the carbon content is two percent or less, by weight, and (3) none of the elements listed below is equal to or exceeds the quantity, by weight, respectively indicated: 1.80 percent of manganese, or 1.50 percent of silicon, or 1.00 percent of copper, or 0.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 1.25 percent of nickel, or 0.30 percent of tungsten, or 0.10 percent of molybdenum, or 0.10 percent of niobium, or 0.41 percent of titanium, or 0.15 percent of vanadium, or 0.15 percent zirconium. All products that meet the written physical description, and in which the chemistry quantities do not equal or exceed any one of the levels listed above, are within the scope of the order unless otherwise specifically excluded. The following products are specifically excluded from the order: (1) Products clad, plated, or coated with metal, whether or not painted, varnished or coated with plastic or other non- metallic substances; (2) SAE grades (formerly AISI grades) of series 2300 and above; (3) products made to ASTM A710 and A736 or their proprietary equivalents; (4) abrasion-resistant steels (i.e., USS AR 400, USS AR 500); (5) products made to ASTM A202, A225, A514 grade S, A517 grade S, or their proprietary equivalents; (6) ball bearing steels; (7) tool steels; and (8) silicon manganese steel or silicon electric steel. Imports of steel plate are currently classified in the HTSUS under subheadings 7208.40.3030, 7208.40.3060, 7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 7208.53.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7225.40.3050, 7225.40.7000, 7225.50.6000, 7225.99.0090, 7226.91.5000, 7226.91.7000, 7226.91.8000, and 7226.99.0000. The HTSUS subheadings are provided for convenience and customs purposes. The written description of the merchandise covered by the order is dispositive. Analysis of Comments Received The issues raised in the case and rebuttal briefs are addressed in the ``Issues and Decision Memorandum'' (Decision Memorandum) from John M. Andersen, Acting Deputy Assistant Secretary, to Ronald K. Lorentzen, Acting Assistant Secretary, dated April 20, 2009, which is hereby adopted by this notice. A list of the issues which parties have raised and to which we have responded is in the Decision Memorandum and attached to this notice as an Appendix. The Decision Memorandum, which is a public document, is on file in the Central Records Unit, main Department building, Room 1117 and accessible on the Web at http:// enforcement.trade.gov/frn/index. html. The paper copy and electronic version of the Decision Memorandum are identical in content. Changes Since the Preliminary Results Based on our analysis of the comments received, we corrected an error involving the improper setting of the length of the control numbers we use for matching U.S. sales to home-market sales. The error resulted in incorrect matches of U.S. sales to home-market sales. We have corrected this error. See the Final Analysis Memorandum for DSM dated April 20, 2009, for detailed information on this correction. Final Results of Review As a result of our review, we determine that the weighted-average dumping margin for DSM is 5.59 percent for the period February 1, 2007, through January 31, 2008. Assessment Rates The Department shall determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries. In accordance with 19 CFR 351.212(b)(1), we have calculated an importer-specific assessment rate for these final results of review. We divided the total dumping margins for the reviewed sales by the total entered value of those reviewed sales for the reported importer. We will instruct CBP to assess the importer-specific rate uniformly on all entries of subject merchandise made by the relevant importer during the period of review. See 19 CFR 351.212(b). The Department clarified its ``automatic assessment'' regulation on May 6, 2003. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003) (Assessment of Antidumping Duties). This clarification will apply to entries of subject merchandise during the period of review produced by DSM for which DSM did not know its merchandise was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries of DSM-produced merchandise at the all-others rate if there is no rate for the intermediate company(ies) involved in the transaction. For a full discussion of this clarification, see Assessment of Antidumping Duties. The Department will issue liquidation instructions to CBP 15 days after the publication of these final results of review. Cash-Deposit Requirements The following deposit requirements will be effective upon publication of this notice of final results of administrative review for all shipments of steel plate from Korea entered, or [[Page 19048]] withdrawn from warehouse, for consumption on or after the date of publication, as provided by section 751(a)(2)(C) of the Act: (1) the cash-deposit rate for DSM will be 5.59 percent; (2) for previously reviewed or investigated companies not listed above, the cash-deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or the less-than-fair-value investigation but the manufacturer is, the cash-deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; (4) if neither the exporter nor the manufacturer has its own rate, the cash-deposit rate will be 0.98 percent, the all-others rate established in the LTFV investigation,\1\ adjusted for the export-subsidy rate in the companion countervailing duty investigation.\2\ These deposit requirements shall remain in effect until further notice. --------------------------------------------------------------------------- \1\ See Notice of Final Determination of Sales at Less Than Fair Value: Certain Cut-To-Length Carbon-Quality Steel Plate Products from Korea, 64 FR 73196, 73214 (December 29, 1999). See also Memorandum To The File from Lyn Johnson concerning All-Others Rate, dated December 12, 2008. \2\ See Final Affirmative Countervailing Duty Determination: Certain Cut-to-Length Carbon-Quality Steel Plate From the Republic of Korea, 64 FR 73176, 73181-86 (December 29, 1999), as amended in Notice of Amended Final Determinations: Certain Cut-to-Length Carbon-Quality Steel Plate From India and the Republic of Korea; and Notice of Countervailing Duty Orders: Certain Cut-To-Length Carbon- Quality Steel Plate From France, India, Indonesia, Italy, and the Republic of Korea, 65 FR 6587, 6588 (February 10, 2000). --------------------------------------------------------------------------- Notification This notice serves as a reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Department's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of doubled antidumping duties. This notice also serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely notification of the destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation. These final results of administrative review are issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act. Dated: April 20, 2009. Ronald K. Lorentzen, Acting Assistant Secretary for Import Administration. Appendix List of Issues Addressed in the Issues and Decision Memorandum Comment 1 - U.S. Indirect Selling Expenses Comment 2 - Home-Market Freight Expenses Comment 3 - Brokerage and Handling Expenses Comment 4 - Short-Term Interest Rate Comment 5 - Bank Charges [FR Doc. E9-9553 Filed 4-24-09; 8:45 am] BILLING CODE 3510-DS-S